Inquiry
Form loading...
Top-grade copper alloy materials trusted by Los Angeles manufacturers and engineers
Beryllium Copper UNS C17200 — commonly referred to as Alloy 25 — is the most widely used beryllium copper alloy in the world. It contains approximately 1.8–2.0% beryllium combined with trace amounts of cobalt or nickel, delivering an exceptional combination of mechanical strength, electrical conductivity, thermal conductivity, and corrosion resistance. After age-hardening heat treatment, C17200 achieves tensile strengths exceeding 1,400 MPa, rivaling many high-strength steels while retaining excellent electrical properties (15–30% IACS conductivity).
In Los Angeles and the broader Southern California industrial corridor, UNS C17200 is a mission-critical material for aerospace component manufacturers, defense contractors, semiconductor equipment producers, EV battery system integrators, and precision tooling shops. Its unique non-sparking characteristic makes it indispensable in oil & gas environments and explosive-hazard facilities. The alloy is available in rod, bar, plate, strip, tube, and wire forms — all of which are supplied by Sichuan Kepai New Materials Co., Ltd. to clients across the United States.
Key physical properties of C17200: Density 8.26 g/cm³ · Electrical Conductivity 22% IACS (AT) · Hardness up to HRC 40 · Modulus of Elasticity 131 GPa · Operating Temperature up to 150°C (300°F) continuous.
Greater LA is one of North America's most dynamic advanced-manufacturing hubs — and C17200 is at its core
Los Angeles County hosts more than 1,000 aerospace and defense companies, including major primes and tier-1 suppliers clustered around LAX, El Segundo, and Long Beach. C17200 beryllium copper is used extensively in aircraft electrical connectors, landing gear components, radar waveguides, and satellite deployment mechanisms where zero-spark performance and fatigue resistance are non-negotiable.
Southern California's booming electric vehicle supply chain — anchored by Tesla's Gigafactory logistics network, BYD's North American operations in Lancaster, and hundreds of EV component manufacturers — demands high-conductivity, high-fatigue beryllium copper for battery contact springs, busbars, charging connectors, and thermal management components. C17200 is the alloy of choice for these safety-critical applications.
The San Gabriel Valley and City of Industry corridors host a dense cluster of PCB manufacturers, semiconductor packaging firms, and precision electronics assemblers. UNS C17200 beryllium copper is used in IC test sockets, spring-loaded contacts, burn-in boards, and precision stamped connectors where dimensional stability under repeated cycling is critical to yield and reliability.
The Port of Los Angeles and the Carson industrial belt remain active petrochemical processing zones. C17200's non-sparking, non-magnetic properties make it the standard material for tools, valve seats, pump impellers, and instrumentation housings used in explosive atmospheres and offshore platform equipment serviced through the LA port complex.
The greater LA–Orange County medical device corridor is home to hundreds of FDA-registered manufacturers. Beryllium copper C17200 is specified for surgical instrument springs, MRI-compatible components, diagnostic equipment probe contacts, and implantable device actuators, where biocompatibility-adjacent alloys with extreme fatigue life are required.
As Los Angeles accelerates its 5G network buildout across Downtown LA, Hollywood, and the South Bay, demand for high-frequency RF connectors, waveguide components, and antenna spring contacts manufactured from C17200 is surging. The alloy's combination of conductivity and spring performance is unmatched for millimeter-wave 5G hardware.
Sichuan Kepai New Material Co., Ltd.
Sichuan Kepai New Materials Co., Ltd., established in 2017, is a high-tech enterprise integrating research and development, production, and sales. Currently, the factory covers an area of approximately 9,000 square meters, with an office space of about 1,000 square meters. The company primarily engages in the production of strategic emerging new materials for the national 13th Five-Year Plan, including special copper alloys such as tellurium copper, high-conductivity oxygen-free copper, silver copper, and dispersion copper, while also focusing on the research and development of high-conductivity, easy-to-machine, high-strength copper alloys. The products are mainly applied in high-tech fields such as new energy vehicles, 5G technology, laser cutting, and lithium battery relays.
The company is located in the western area of the Sichuan Guanghan Industrial Development Zone, adjacent to National Highway 108, boasting a superior geographical location and convenient transportation, which lays a solid foundation for the rapid development of the enterprise. Since its establishment, Kepai has adhered to the business philosophy of "innovation-driven development, quality wins the market," committed to providing customers with the highest quality high-end copper alloy materials, and promoting industrial upgrading and sustainable development.
The global beryllium copper market is projected to reach USD 1.8 billion by 2030 — driven by megatrends reshaping Los Angeles and global industry
California's mandate for 100% zero-emission vehicle sales by 2035 is creating unprecedented demand for high-performance copper alloys in charging infrastructure, battery management systems, and powertrain electronics. C17200 is increasingly specified for EV contactors and thermal interface components due to its superior fatigue life compared to phosphor bronze alternatives.
Next-generation commercial aircraft and satellite constellations (including SpaceX's Starship supply chain based in Hawthorne, CA) require smaller, lighter, stronger components. C17200's strength-to-weight ratio and machinability make it a preferred substitute for heavier steel components in connectors, bearings, and precision fasteners.
The rollout of 5G mmWave infrastructure across Los Angeles metro requires RF connectors and waveguide components with tighter tolerances and higher frequency performance. Beryllium copper C17200 offers the conductivity, spring-back, and plating adhesion required for SMA, SMP, and 2.92mm connector contacts operating above 40 GHz.
With CHIPS Act investments flowing into domestic semiconductor manufacturing and equipment supply chains, demand for precision C17200 components in wafer handling, probe cards, and ion implantation systems is accelerating. Southern California equipment manufacturers are actively sourcing consistent, certified beryllium copper rod and plate to meet production ramp schedules.
Technological innovation is the core competitiveness of Sichuan Kepai New Materials Co., Ltd. The company has a research and development and production team composed of senior industry experts who keep pace with international cutting-edge technology trends and continuously explore the unknown boundaries in the field of new copper alloy materials. Through a combination of independent research and development and industry-university-research collaboration, Kepai has made breakthrough progress in several areas, including high-performance tellurium copper, lead copper, and sulfur copper. Many of its technological achievements have reached international advanced levels and have been successfully applied in various industries such as new energy vehicles, precision machining parts, plasma cutting, relays, and energy storage, earning widespread recognition and praise in the market.
Kepai's product line is rich and diverse, covering a comprehensive range of solutions from basic materials to high-end customization. We focus on providing customers with high-performance, high-quality high-end copper alloy products, including but not limited to pure copper, oxygen-free copper, oxygen-free high-conductivity tellurium copper, nickel tellurium copper, tin bronze, beryllium copper, lead bronze, sulfur copper, and chromium zirconium copper. These products play an important role in reducing production costs and enhancing product performance due to their excellent physical and chemical properties and environmental friendliness, creating significant economic and social benefits for customers.
In the face of global market competition, Sichuan Kepai New Materials adheres to the development strategy of "rooted in Sichuan, radiating nationwide, and moving towards the world." By continuously optimizing market layout and improving the sales network, we have established a stable customer base in multiple provinces and cities across the country and have formed long-term cooperative relationships with several internationally renowned enterprises. At the same time, the company actively expands into overseas markets, participates in international competition and cooperation, and strives to promote Kepai's brand influence on the global stage — including growing partnerships with Los Angeles-area distributors and manufacturers.
We understand that the long-term development of an enterprise is inseparable from an excellent corporate culture. We advocate the corporate spirit of "integrity, innovation, collaboration, and win-win," encouraging employees to explore boldly and innovate courageously, while also emphasizing teamwork and talent cultivation, striving to create a harmonious, open, and inclusive work atmosphere. We believe that only by continuously pursuing excellence and creating value can we win the trust of customers and the respect of society.
Advanced manufacturing and testing equipment ensuring C17200 quality for Los Angeles industrial clients
Smelting
Laying-off
Extrusion
Drawing
Straightening
Package
Eddy Current Conductance Instrument
Chemical Composition Test Room
Metallographic Sample Polishing Machine
Microcomputer Controlled Electro-Hydraulic Servo Universal Testing Machine
Liquid Crystal Display Electronic Universal Testing Machine
Hardness Tester
Looking ahead, Sichuan Kepai New Materials Co., Ltd. will continue to uphold its original intention, with even greater enthusiasm and determination, to engage in research and application in the field of new materials, contributing to the development of the new copper alloy materials industry in China and globally. We look forward to working hand in hand with friends from all walks of life — including our valued partners across Los Angeles and Southern California — to create a brilliant future together!
Contact Us Now →Explore our full range of high-performance copper alloy solutions
