Completely free of hydrogen embrittlement risk— a decisive advantage over regular copper
- Product Positioning and Name
Product Name: C10100 Oxygen-Free Electronic Copper (Oxygen-Free Electronic Copper, abbreviated as OFE/OFHC)
Core Positioning: The purest in industrial copper with the best electrical and thermal conductivity, electronic-grade material, purity ≥99.99%, oxygen content ≤0.0005%.
Corresponding Standards:
- US UNS Number: C10100
- Approximate Chinese Grades: TU1 / TU0 (GB/T 5231)
- European Standard: CW009A / Cu-OFE
- Chemical Composition (Mass Percentage)
| Element | Content Requirement |
|---|---|
| Copper Silver (Cu Ag) | ≥ 99.99% |
| Oxygen (O) | ≤ 0.0005% (5 ppm) |
| Phosphorus (P) | ≤ 0.0003% |
| Other Impurities | Individual ≤ 0.001%~0.002%, Total ≤ 0.01% |
- Core Physical Properties
| Property | Typical Value | Description |
|---|---|---|
| Electrical Conductivity | ≥ 101% IACS | Key parameter, better than standard annealed copper, second only to silver among metals |
| Thermal Conductivity | 391~398 W/(m·K) | Excellent heat dissipation |
| Density | 8.94 g/cm³ | - |
| Melting Point | 1083℃ | - |
| Elastic Modulus | 115~130 GPa | - |
| Coefficient of Linear Expansion | 17.0~17.7 ×10⁻⁶/℃ | - |
- Mechanical Properties (by supply condition)
Make sure to label the supply condition (Temper) when shelving:
| Condition | Tensile Strength Rm | Yield Strength Rp0.2 | Elongation | Hardness HV |
|---|---|---|---|---|
| Annealed (O/R220) | 220~260 MPa | ≤140 MPa | ≥33% | 40~65 |
| Half-hard (R240) | 240~300 MPa | ≥180 MPa | ≥8% | 65~95 |
| Hard (R290/R360) | 290~360 / ≥360 MPa | ≥250 / ≥320 MPa | ≥4% / ≥2% | 90~110 / ≥110 |
- Core Features (For Highlighting Selling Points)
-
⚡Ultimate Electrical and Thermal Conductivity
Electrical conductivity ≥101% IACS, thermal conductivity around 391~398 W/(m·K), suitable for scenarios with very high demands on power transmission efficiency and heat dissipation.
-
🛡️Completely Free from Hydrogen Embrittlement Risk
Oxygen content ≤5 ppm; when heated in hydrogen or reducing atmospheres, it won’t crack due to ‘hydrogen disease.’ This is the key advantage of C10100 over regular copper (like C11000 with 200~600 ppm oxygen).
-
🌌High Vacuum and Low Volatility
Extremely low levels of volatile elements like cadmium, mercury, zinc (≤1 ppm); releases minimal gas in high vacuum environments, making it ideal for vacuum devices and coating equipment.
-
⚙️Excellent Machining and Welding Performance
- Exceptional cold/hot workability, can be deeply drawn, stretched, and bent
- Excellent weldability: suitable for TIG, MIG, electron beam welding, vacuum brazing, with no porosity in welds
- Poor machinability (common to pure copper), not ideal for applications mainly using machining -
💧Good Corrosion Resistance
Resistant to air, freshwater, seawater, non-oxidizing acids and alkalis; not resistant to oxidizing acids or ammonia-containing environments.
- Typical Application Areas
| Field | Specific Applications |
|---|---|
| High-end Electronics/Electrical | Vacuum tube anodes, waveguides, coaxial cables, transistor bases, bus conductors |
| High Vacuum/Low Temperature | Accelerator cavities, vacuum seals, vacuum circuit breakers, low-temperature wires |
| Communication/Heat Dissipation | Submarine fiber optic cables, high-power heat dissipation substrates, laser mirrors |
| Semiconductor | Lead frames, bonding wires, sputtering targets |



